• Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line
  • Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line
  • Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line
  • Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line

Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line

Standard: CE
Surface Treatment: N/a
Energy Source: N/a
Material: Stainless Steel
Length: 5m
Transport Package: Plywooden Case
Customization:

Contact Supplier

Diamond Member Since 2018

Suppliers with verified business licenses

Manufacturer/Factory, Trading Company

Basic Info.

Model NO.
Forming Equipment
Specification
custom
Trademark
Wise Channel
Origin
Jiangsu China
HS Code
8463101900
Production Capacity
5units/Month

Product Description

I. Single-head Cutting Machine
Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line
The equipment mainly consists of five parts, i.e., rack, preliminary guiding straightening system, traction device, travel code counting mechanism and cutting and pulling system. The base is welded with square tubes and plates and has gone through vibration aging treatment; the primary guiding straightening system consists of X-direction and Y-direction straightening wheels, guide sleeve and fixed mounts; the traction device consists of motor, driving/driven wheel, conveying wheel, H belt, adjusting slider and mounting base; the travel code counting mechanism consists of encoder, pressing wheel, coding wheel and mounting base; the cutting and pulling system consists of cylinder, cylinder joint, cylinder clamping seat, thrust plate, cutting head and motor.

The steel pipe passes through the preliminary guiding and straightening system by multi-roller stagger rolling, and is straightened under the action of the traction device. By simultaneous counting by travel code counting mechanism, the length required is calculated. After that, the traction device stops conveying, and the cutting head starts to rotate for cutting under the action of clamping by the cylinder of the cutting and pulling system. When the cut steel pipe is about to break, the two cylinders act simultaneously to pull and break the steel pipe, and the traction device continues to work. This operation is cycled.

II. Zinc Remover
Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line
This equipment mainly consists of five parts, i.e., rack, protective cover, steel wire wheel, motor and dust collection device. The dust collection device is composed of an axial flow fan, a pipeline and a dust collecting bucket.

Put a bundle of about ten steel pipes close to the steel wire wheel driven by the motor. Through the continuous friction with the steel wire wheel, the zinc on the surface of the steel pipe can be removed to meet the required technical requirements.

III. Condenser Stretcher
Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line

The equipment is suitable for products with many bending loops and long workpieces. The principle is to coil the pipe according to the size specified in the drawing by the stretching wheel, start the transverse stretching cylinder, and realize forming of the pipe after proper stretching. Under the control of PLC, start the operation switch, and the two moving platforms stretch to both sides under the action of the oil cylinder, so as to realize forming of the product by stretching. The equipment is mainly composed of hydraulic station, stretching platform, hydraulic cylinder, clamping cylinder, electrical system and control system.
The main process flow is as follows: manually feed the pipe, manually coil the pipe at each stretching wheel according to the drawing to the shape specified in the drawing, start the foot switch, the clamping block will act under the action of the cylinder to clamp the pipe head to prevent extraction, and automatically stretch to the size specified in the drawing under the action of the cylinder.
Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line

IV. Flaring Machine
Skin Condenser and Hot Tube Forming Equipment for Refrigerator Production Line
The equipment mainly consists of five parts, i.e., rack, trigger electrode, clamping device, displacement mechanism and end expanding device. The rack is welded from angle steel and plates; the clamping device consists of clamping cylinder, cylinder mounting base and clamping block; the displacement mechanism consists of cylinder, cylinder mounting base, track and buffer structure; the end expanding device  consists of cylinder, track, back seat of the cylinder and end expanding mechanism.

Start feed the pipe manually, and the front part of the pipe touches the trigger electrode and the equipment runs automatically. The cylinder begins to clamp the pipe, and when the cylinder magnetic switch detects the signal, end expanding start. After the action of end expanding, the cylinder magnetic switch detects the signal, and "End expanding" returns back. After that, the cylinder magnetic switch detects the signal, and positioning action starts. After positioning, the cylinder magnetic switch detects the signal, and the second end expanding action starts. After end expanding in place, the cylinder magnetic switch detects the signal, and "End expanding" returns back again. After that, the cylinder magnetic switch detects the signal, and the clamping device returns back. The whole action flow is cycled in sequence;


 

Send your message to this supplier

*From:
*To:
avatar Mr. Fred Sun
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now