Downhole Tools Cutter Bar Wireline Go-Devil with Slip Over Centraliser

• Customization: Available
• After-sales Service: Online
• Warranty: One Year
• Model NO.: Cutter Bar
• Certification: ISO 9001:2008
• Power Source: Hydraulic
• Operation Pressure: Vacuum
• Applicable Medium: Mud, Water
• Structure: Vertical
• Material: Cast Steel
• Processing Type: Casting
• Use: Well Drilling
• Machinery Test Report: Provided
• Thread Type: Nc/Reg
• for Wire Size: 0.108", 0.125"
• Size: 1.5"~2.5"
• Transport Package: Wooden Case
• Specification: Standard
• Trademark: Wisechannel
• Origin: Jiangsu China
• HS Code: 84304900
• Production Capacity: 1000units Per Year
• Package Size: 60.00cm * 4.00cm * 4.00cm
• Package Gross Weight: 12.000kg

Product Description

 

_{Designed to cut and retrieve wireline from a stuck tool string, the Hunting Go Devil is manufactured with an integral wireline rope socket head with a standard milled slot and guide to accommodate any wire size up to 0.219". Go Devils with slots to accommodate larger OD wire are available upon request. Hunting Go Devils are provided with locating grooves to accommodate slipover centralisers to improve the performance and allow use in different casing sizes. Hunting supplies two types of Go Devils, designed for two different situations}

 

Mule Shoe (Angled Bottom) Go Devil

<sup><sub>• In situations where the stuck tool string's rope socket is clean, an angled bottom Go Devil can be deployed, which will cut the wire when it strikes the rope socket. An angled bottom Go Devil is only used in a well where fluid is present in order to slow the descent. Where a Go Devil has locating grooves a sized slipover centraliser can be fitted, to prevent the Go Devil from wedging with the stuck tool string or causing tubing damage when it "kicks off". Flat Bottomed Go Devil

• In situations where the stuck tool string's rope socket is fouled by sand, debris or wire, a flat bottom Go Devil can be deployed. The flat bottom Go Devil provides a wireline socket above the obstructing material, so that the cutter will have a solid base on which to cut the wireline.</sub></sup>

 

 

Size	Fishing Neck	Length	Applicable Wireline O.D.
1.5"	1.375"	2ft	0.092"~0.108"/7/32"~3/16"
1.5"	1.375"	3ft	0.092"~0.108"/7/32"~3/16"
1.5"	1.375"	5ft	0.092"~0.108"/7/32"~3/16"
1.875"	1.75"	2ft	0.092"~0.108"/7/32"~3/16"
1.875"	1.75"	3ft	0.092"~0.108"/7/32"~3/16"
1.875"	1.75"	5ft	0.092"~0.108"/7/32"~3/16"
2.125"	1.75"	2ft	0.092"~0.108"/7/32"~3/16"
2.125"	1.75"	3ft	0.092"~0.108"/7/32"~3/16"
2.125"	1.75"	5ft	0.092"~0.108"/7/32"~3/16"
2.5"	2.313"	2ft	0.092"~0.108"/7/32"~3/16"
2.5"	2.313"	3ft	0.092"~0.108"/7/32"~3/16"
2.5"	2.313"	5ft	0.092"~0.108"/7/32"~3/16"

Note. Other sizes are available upon request.

 

Q:How can I place order? 
A: You can contact us by email or social media like WhatsApp on the order detail or place order on line. 

Q:How about the payment?
A: For new clients, advance payment(30%-100% of total amount) is required, the balance need to be paid before the delivery after your inspection.

Q:How can I pay you?
A: By T/T (Telegraphic Transfer) or L/C (Letter of Credit). After you receive the PI, you can make the payment through your bank as per the terms mentioned in PI.

Q: What's the order procedure? 
A: First we discuss order details, production details by email ,TM or other social media; then we issue you an PI for your confirmation. You will be requested to make full payment or deposit before we go into production.After we get the deposit, we start to process the order. Depending on the products you order, we usually a couple of days or even moths to complete production if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we shall arrange the shipment for you. 

Q: How do you deal with  defective products received by the clients? 
A:  If there are some defective items, we usually credit to our customer or replace them in next shipment.