Casing Scraper is ideal for the removal of mud, cement, bullets, rust, scale, paraffin, perforation burrs and other obstructions from the inside walls of casing. Maintaining a clean casing I.D. is important when operating drilling, fishing, or wireline tools.
1. Full circle blades contact 600° surface at once.
2. Short, compact, easy to assemble and disassemble.
3. Longer guide taper on blades for passing through joints without hanging.
4. Vertical and rotary operation may be run on wireline or drill pipe.
5. Investment cast tool steel blades allows maximum scraping ability.
| Type |
Scraper range |
Connection |
All length mm(inch) |
ID mm(inch) |
Qty. of blade |
| GX 4-1/2 |
92-112 |
2-3/8REG |
895 |
25 |
2×3 |
| GX 5 |
95-118 |
NC26 |
895 |
25 |
2×3 |
| GX 5-1/2 |
110-133 |
2-7/2REG |
1010 |
32 |
2×3 |
| GX 6-5/8 |
136-162 |
3-1/2REG |
1010 |
32 |
2×3 |
| GX 7 |
142-168 |
3-1/2REG |
1010 |
32 |
2×3 |
| GX 8-5/8 |
177-155 |
3-1/2REG |
1200 |
38.1 |
2×3 |
| GX 9-5/8 |
209-235 |
4-1/2REG |
1212 |
57 |
2×5 |
| GX 10-3/4 |
260-240 |
6-5/8REG |
1500 |
57 |
2×5 |
| GX 13-3/8 |
290-330 |
6-5/8REG |
1372 |
71 |
2×7 |
Q:How can I place order?
A: You can contact us by email or social media like WhatsApp on the order detail or place order on line.
Q:How about the payment?
A: For new clients, advance payment(30%-100% of total amount) is required, the balance need to be paid before the delivery after your inspection.
Q:How can I pay you?
A: By T/T (Telegraphic Transfer) or L/C (Letter of Credit). After you receive the PI, you can make the payment through your bank as per the terms mentioned in PI.
Q: What's the order procedure?
A: First we discuss order details, production details by email ,TM or other social media; then we issue you an PI for your confirmation. You will be requested to make full payment or deposit before we go into production.After we get the deposit, we start to process the order. Depending on the products you order, we usually a couple of days or even moths to complete production if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we shall arrange the shipment for you.
Q: How do you deal with defective products received by the clients?
A: If there are some defective items, we usually credit to our customer or replace them in next shipment.
){kind=link}